Advertisement
2
INSTALL HANDLE TRIM
Turn HANDLE STEM fully clockwise (Tub Filler position).
Place the HANDLE ADAPTER on the HANDLE STEM.
Install the ADAPTER SCREW and tighten securely.
Position LEVER HANDLE and place on ADAPTER. Install
the HANDLE SCREW and tighten securely.
3
INSTALL HAND SHOWER
Unscrew the HOLDER from the SHOWER ESCUTCHEON. Slip the
SHOWER HOSE through the HOLDER and the SHOWER ESCUTCHEON.
Insert a SEAL WASHER into the SHOWER HOSE CONNECTOR.
Pull out the SLEEVE GUARD and HOSE. Unthread the SLEEVE GUARD
from the HOSE END connection. Be careful not to allow the HOSE to
fall back through the SLEEVE.
Thread the SHOWER HOSE onto the HOSE END connection and tighten
securely.
Apply a sealant around the HOSE HOLE.
Thread the SHOWER ESCUTCHEON into the SLEEVE until the ESCUTCHEON
contacts the finished deck.
Loosen the SET SCREW in the SHOWER ESCUTCHEON and rotate the
ESCUTCHEON towards the center of the tub. Retighten the SET SCREW.
Thread the HOLDER into the SHOWER ESCUTCHEON.
Insert a SEAL WASHER into the SHOWER HOSE
connector and connect the HAND SHOWER.
Place the HAND SHOWER into the HOLDER.
For toll-free information and answers to your questions, call:
Weekdays 8:00 a.m. to 7:00 p.m. Eastern Time
IN CANADA 1-800-387-0369 (TORONTO 1-905-306-1093)
P r o d u c t n a m e s l i s t e d h e r e i n a r e t r a d e m a r k s o f A m e r i c a n S t a n d a r d I n c .
© A m e r i c a n S t a n d a r d I n c . 2 0 0 1
SLEEVE
GUARD
HOTLINE FOR HELP
1 (800) 442-1902
HANDLE
SCREW
ADAPTER
SCREW
ADAPTER
HANDLE
STEM
SEAL WASHER
HOLDER
SHOWER HOSE
SEAL WASHER
HOSE END
HOSE
SLEEVE
METAL
LEVER
HANDLE
HAND SHOWER
SHOWER HOSE
SHOWER ESCUTCHEON
RUBBER RING
HAND SHOWER
SEAL WASHER
HOLDER
SET SCREW
ESCUTCHEON
SLEEVE
SHOWER
SEALANT
M 9 6 8 7 6 2
Advertisement
