Advertisement
Quick Links
T H E
C O L L E C T I O N
by
BOTTOM MOUNT KITCHEN FAUCET
Thank you for selecting American-Standard...the benchmark of
fine quality for over 100 years.
To ensure that your installation proceeds smoothly--please read
these instructions carefully before you begin.
TOOLS REQUIRED
Tubing Cutter
1
INSTALL FAUCET
Install LOCK NUT (1) and RUBBER WASHER (2) onto SPOUT BODY (3).
Insert SPOUT BODY (3) through mounting hole from underside of SINK.
Place RUBBER RING (4) into SPOUT ESCUTCHEON (5) and thread ESCUTCHEON (5)
onto SPOUT BODY (3) until snug against internal stop.
From under sink tighten LOCK NUT (1) to secure SPOUT BODY (3).
Make sure O-RING (6) is in place. Thread SPOUT ASSEMBLY (7) onto SPOUT
ESCUTCHEON (5) and hand tighten.
5
4
2
1
™
Turn off hot and cold water supplies before beginning.
3
Installation
Instructions
4251
Adjustable Wrench
Channel Locks
CAUTION
Certified to comply with ASME A112.18.1M
Plumbers' Putty or Caulking
6
M 9 6 8 4 1 2 A
Flat Blade Screwdriver
Phillips Screwdriver
7
Advertisement
Related Manuals for American Standard Standard 4251
Summary of Contents for American Standard Standard 4251
- Page 1 T H E C O L L E C T I O N ™ BOTTOM MOUNT KITCHEN FAUCET Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years. To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin. TOOLS REQUIRED Tubing Cutter INSTALL FAUCET...
- Page 2 INSTALL VALVE BODIES Install LOCK NUT (1) and RUBBER WASHER (2) onto VALVE BODIES (3). Insert VALVE BODY (3) through mounting hole from underside of SINK. Place RUBBER RING (4) into DECK ADAPTER (5) and thread DECK ADAPTER (5) onto VALVE BODY (3) until snug against internal stop. Set VALVE BODIES (3), so that their outlets are facing toward center of sink, and tighten LOCK NUT (1) using WRENCH (8) supplied with faucet.
- Page 3 INSTALL SPRAY HOLDER NOTE: FAUCET can be installed with or without Hand Spray. Place SPRAY HOLDER (1) into separate hole of SINK (2) and assemble NUT (3) onto shank from underside of SINK (2). Hand tighten NUT (3). FITTING WITH SPRAY Unscrew SPRAY CAP (5) from HOSE ADAPTOR (4).
- Page 4 T H E “ ” C O L L E C T I O N ™ BOTTOM MOUNT KITCHEN FAUCET MODEL NUMBER 4251 M962162-0070A INDEX BUTTON (HOT) M962163-0070A INDEX BUTTON (COLD) 918428-0070A HANDLE SCREW M908505-YYY0A HANDLE ESCUTCHEON 918049-0070A HANDLE ADAPTER M962161-0070A DECK ADAPTER KIT 994053-0070A...