Jeep Grand Cherokee 2013 Owner's Manual page 237

Hide thumbs Also See for Grand Cherokee 2013:
Table of Contents

Advertisement

A connector plug is stowed on top of the bumper beam.
Insert the wiring connector into the connector plug.
NOTE: When the sensor is removed, Adaptive Cruise
Control, Normal Cruise Control, and Forward Collision
Warning will not be available. The cluster will display the
warning "ACC/FCW Unavailable - Service Radar Sensor."
To reinstall the sensor and bracket assembly reverse the
process above. The fastener torque required to assembly
the bracket back to the beam is 6.6 ft lbs (9 N·m).
ACC Unavailable Warning
If the system turns off, and the EVIC displays "ACC/
FCW Unavailable, Vehicle System Error", there may be a
temporary malfunction that limits ACC functionality.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 235
Although the vehicle is still drivable under normal
conditions, ACC will be temporarily unavailable. If this
occurs, try activating ACC again later, following a key
cycle. If the problem persists, see your authorized dealer.
Service ACC Warning
If the system turns off, and the EVIC displays "ACC/
FCW Unavailable Service Radar Sensor", it indicates
there is an internal system fault. Although the vehicle is
still drivable under normal conditions, have the system
checked by an authorized dealer.
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Grand cherokee 20132011 grand cherokee

Table of Contents