To Set A Desired Acc Speed - Jeep Grand Cherokee 2013 Owner's Manual

WARNING!
Leaving the Adaptive Cruise Control (ACC) system on
when not in use is dangerous. You could accidentally
set the system or cause it to go faster than you want.
You could lose control and have a collision. Always
leave the system off when you are not using it.

To Set A Desired ACC Speed

When the vehicle reaches the speed desired, push the
SET - button and release. The EVIC will display the set
speed.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 223
ACC Set
Remove your foot from the accelerator pedal. If you do
not, the vehicle may continue to accelerate beyond the set
speed. If this occurs:
• The message "DRIVER OVERRIDE" will display in
the EVIC.
3