Cleaning The Spray Arms - Miele G 7855 Operating Instructions Manual

Cleaning the spray arms

Waste particles can lodge in the spray
arm jets.
The spray arms should be inspected
and cleaned regularly (approx. every
6 months).
^ Use a sharp pointed object to push
particles into the spray arm jets and
rinse well under running water.
Remove the spray arms as follows:
^ Unscrew the upper spray arm.
^ Remove the middle spray arm (on
the top basket) by unscrewing the
toothed wheel mechanism.
Important:
The toothed wheel mechanism has a
left hand thread, and to unscrew it, it
must be turned to the right with the
spray arm.
^ First remove the bottom basket and
then pull the lower spray arm off.
Cleaning and care
Particles in the lower spray arm are
easier to rinse out if the cap is first
opened.
^ Open the cap in the direction of the
arrow. After cleaning close up the
cap again.
Important:
After replacing the spray arms check
that they move freely.
41