Rng-Rsp Ranging Response; Rng-Req Ranging Request; Reg-Req Registration Request - Motorola SB5100 Series Installation Manual

RNG-RSP Ranging Response

Code Event Log Messages
R00.0 RNG-RSP Ranging Response
R01.0
NO Maintenance Broadcasts for Ranging
opportunities Received T2 time-out.
R02.0 No Ranging Response received, T3 time-
out
R03.0 Ranging Request Retries exhausted.
R04.0 Received Response to Broadcast
Maintenance Request, But no Unicast
Maintenance opportunities received. T4
time-out.
R05.0 Started Unicast Maintenance Ranging no
Response received. T3 time-out.
R06.0
Unicast Maintenance Ranging attempted,
No Response, Retries exhausted.
R07.0
Unicast Ranging Received Abort
Response, Re-initializing MAC.

RNG-REQ Ranging Request

Code Event Log Messages
R100.0
RNG-REQ Ranging Request
R101.0 No Ranging Requests received from
POLLED CM (CMTS generated polls)
R102.0 Retries exhausted for polled CM (report
SID). After 16 R101.0 errors.
R103.0 Unable to Successfully Range CM (report
SID) Retries Exhausted. Note: this is
different from R102.0 in that it was able to
try; i.e., got REQs but failed to Range
properly.
R104.0 Failed to receive Periodic RNG-REQ from
modem (SID X), Timing-out SID.

REG-REQ Registration Request

Code Event Log Messages
I100.0 REG-REQ Registration Request
I101.0 Invalid MAC header.
I102.0 Invalid SID, not in use.
Event Log Messages
Level Cable Modem Actions
Level Cable Modem Actions
Level Cable Modem Actions
7 (Info) No action taken
SURFboard Cable Modem Installation Manual
B-3