Oki PACEMARK 4410 Maintenance Manual page 94

Item No. Items
Number
+5 Printing position is shifted by 0.25mm to right of the reference position.
+4 Printing position is shifted by 0.20mm to right of the reference position.
+3 Printing position is shifted by 0.15mm to right of the reference position.
+2 Printing position is shifted by 0.10mm to right of the reference position.
+1 Printing position is shifted by 0.05mm to right of the reference position.
0 Reference position
-1 Printing position is shifted by 0.05mm to left of the reference position.
-2 Printing position is shifted by 0.10mm to left of the reference position.
-3 Printing position is shifted by 0.15mm to left of the reference position.
-4 Printing position is shifted by 0.20mm to left of the reference position.
-5 Printing position is shifted by 0.25mm to left of the reference position.
4
40496501TH Rev.1
Standard Value
Correction dot position of reverse printing
Illustration
Correct the printing alignment in each
"Registration1 ....7". (Note2)(Note3)
Note2)After printing, change items with
4 switch
Note3)The reverse printing position is
shifted by 0.05mm to the reference
position by pressing 4 switch or 8
and 4 switch.
4After completing the correction,
press 6 switch to store the corrected
values to the inside of printer. (Note4)
Note4)If the 6 switch is not pressed,
the corrected values cannot be stored
and the settings are returned to the
8 and 4
previous set values.
Press 5 while holding 8 to print a
menu page to check the registration.
(See the left drawing)
Adjustment Method
94