LG LRG3097ST User Manual page 49

T RO U B L E S H O OT I N G
BEFORE CALLING FOR SERVICE
Problem
Convection fan not
working (convection
models)
Drawer does not slide
smoothly or drags
Warming drawer will
not work
Excessive
condensation in the
drawer
Food dries out in
warming drawer
PF (Power Failure)
displayed / Clock is ashing
48
Possible Causes
• Preheat temperature not reached.
• Operates opposite the heating cycle.
• The drawer is out of alignment.
• Drawer is over-loaded or load is
unbalanced.
• A fuse in your home may be blown or
the circuit breaker tripped.
• The oven is self-cleaning.
• Controls improperly set.
• Liquid in drawer.
• Uncovered foods.
• Temperature setting too high.
• Moisture escaping.
• Drawer not fully closed.
• This is normal. Depending on your range
model, the display will show either "PF" or
a ashing clock. This means that the range
has just been plugged in, or that it has
experienced a power interruption.
Solutions
• Fan will start automatically once the preheat
temperature is reached.
• This is normal.
• Fully extend the drawer and push it all the way in.
See the Care and Cleaning of the Range
• Reduce weight. Redistribute drawer contents.
• Replace the fuse or reset the circuit breaker.
• Wait for the self-clean cycle to nish and the oven
to cool.
• See the Using the Electric Warming Drawer
section.
• Remove liquid.
• Cover food with lid or aluminum foil.
• Reduce temperature setting.
• Cover food with lid or aluminum foil.
• Push drawer in until latch engages.
• To clear "PF message, press the "Clear/Off" key on the
oven controls. If your oven displays a ashing clock, then
press the "Clock" key and reset the time, or press any key
to stop ashing.
section.