Viewing Videos - JVC D­ILA DLA­RS66 Instructions Manual

Viewing Videos
STANDBY/ON LAMP
3
26
MEMO
WARNING
When you are using
Connect the power cord, and ensure that the "STANDBY/ON" indicator
lights up in red.
Turn on the power
Remote control: press the C [ON] button
Projector unit: press the A [STANDBY/ON] button
The "STANDBY/ON" indicator light switches from red to green (light
goes off after the unit starts up).
1
(
"STANDBY/ON" lights up (red)
2
In standby state
STANDBY/ON TANDBY ND
Choose the image to project
Remote control: press the [INPUT] button ([HDMI 1], [HDMI 2],
[COMP.], [PC] (
Projector unit: press the [INPUT] button (pressing the button each time
switches the mode)
Play back the selected device to project the image.
To hide the image temporarily
Press the [HIDE] button on the projector unit or remote control
The "STANDBY/ON" indicator light starts to blink in green.
Press the [HIDE] button again to resume display of the image.
The power cannot be turned off when the image is temporarily
hidden.
, be sure to remove the lens cover.
) The motorized lens cover opens.
"STANDBY/ON" lights up (green)
LAMP WARNING
only))
HDMI 1
HDMI 2 COMP.
During lamp startup
STANDBY/ON TANDBY ND LAMP WARNING
PC ( K L )