1-2 Product Specifications - Gigabyte GA-P61A-D3 User Manual

1-2 Product Specifications
CPU Support for Intel
Š
Intel
in the LGA1155 package
(Go to GIGABYTE's website for the latest CPU support list.)
L3 cache varies with CPU
Š
Chipset Intel
Š
Memory 2 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory
Š
Dual channel memory architecture
Š
Support for DDR3 1333/1066/800 MHz memory modules
Š
Support for non-ECC memory modules
Š
Support for Extreme Memory Profile (XMP) memory modules
Š
(Go to GIGABYTE's website for the latest supported memory speeds and memory
modules.)
Audio Realtek
Š
High Definition Audio
Š
2/4/5.1/7.1-channel
Š
Support for S/PDIF Out
Š
LAN Atheros GbE LAN chip (10/100/1000 Mbit)
Š
Expansion Slots Š 1 x PCI Express x16 slot, running at x16
(The PCI Express x16 slot conforms to PCI Express 3.0 standard.)
2 x PCI Express x1 slots
Š
(All PCI Express x1 slots conform to PCI Express 2.0 standard.)
3 x PCI slots
Š
Storage Interface Š Chipset:
-
Marvell
Š
-
-
USB Chipset:
Š
-
VIA
Š
-
Internal 1 x 24-pin ATX main power connector
Š
Connectors 1 x 8-pin ATX 12V power connector
Š
Core i7 processors/Intel
® ™
Core i3 processors/Intel Pentium
® ™ ®
H61 Express Chipset
®
* Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical
memory is installed, the actual memory size displayed will be less than the size of
the physical memory installed.
* To support XMP memory, you must install an Intel 22nm (Ivy Bridge) CPU.
ALC887 codec
®
* T o configure 7.1-channel audio, you have to use an HD front panel audio module
and enable the multi-channel audio feature through the audio driver.
* Whether PCI Express 3.0 is supported depends on CPU and graphics card
compatibility.
4 x SATA 3Gb/s connectors (SATA2 0~3)
88SE9172 chip:
®
2 x SATA 6Gb/s connectors (GSATA3 4~5)
Support for RAID 0 and RAID 1
6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through
the internal USB headers)
VL805 chip:
®
4 x USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through
the internal USB header)
* Be sure to connect your USB device(s) to the USB 2.0/1.1 ports before the USB 3.0
driver is installed. (refer to the labels in section 1-6, "Back Panel Connectors.")
- 7 -
Core i5 processors/
® ™
processors/Intel Celeron processors
® ® ®