HP Q1910 User Manual page 26

Icon
20 Chapter 4 Operating the Monitor
Main Menu Options
Management
Sub-menu Options
OSD Timeout
Power Saver
Power on Recall
Mode Display
Source Control
(Select Models)
DVI
VGA
Default Source
Auto Switch Source
Description
Sets the time in seconds that the OSD is
visible after the last button is pressed. The
factory default is 30 seconds.
Enables the power saving feature (see
"Power-Saver Feature" in this chapter).
Select:
On
Off
The factory default is On.
Restores power to the monitor following
an unexpected removal of power. Select:
On
Off
The factory default is On.
Displays the resolution, refresh rate, and
frequency information on the screen each
time the OSD Main Menu is accessed.
Select:
On
Off
The factory default is On or Off,
depending on the model.
Selects the power-management features
of the monitor.
Selects the video input signal. VGA is the
factory default.
Selects DVI as the video input signal.
Selects VGA as the video input signal.
Selects the default or primary video input
signal when the monitor is connected to
two active and valid video sources. The
monitor will automatically determine the
video format.
Turns the system's automatic video signal
input to On or Off. The factory default is
On.
ENWW