HP ProDesk 405 G2 Brochure & Specs page 39

QuickSpecs
Technical Specifications - Networking and Communications
Frequency Band
Antenna Structure
Data Rates
Security
Roaming
Output Power
Power Consumption
Bluetooth Power Consumption Peak operating: 330 mW
Power Management
Receiver Sensitivity
802.11b/g/n
802.11a/n
2 transmit; 2 receive (2x2)
Two embedded dual band 2.4/5 GHz antennas are provided to the card to support WLAN MIMO
communications and Bluetooth communications.
802.11b: 1, 2, 5.5, 11 Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n: card will support rates for NSS=1 and NSS=2 for RX and TX for 20 and 40 MHz channels.
Short and long guard interval shall be supported.
IEEE and WiFi compliant 64 / 128 bit WEP encryption for a/b/g mode only
AES-CCMP: 128 bit in hardware
802.1x authentication
WPA, WPA2: 802.1x. WPA-PSK, WPA2-PSK, TKIP, and AES.
WPA2 certification
IEEE 802.11i
Cisco Certified Extensions, all versions through V5
WAPI
NOTE: Check latest software/driver release for updates on supported security features.
IEEE 802.11 compliant roaming between band Access Points
+13.5 dBm minimum
Maximum output power must be able to achieve modular regulatory certification peak gain of
+3dBi at 2.4GHz and +5dBi at 5GHz
NOTE: Maximum output power may vary by country according to local regulations.
Transmit: 2.0 Watts
Receive: 1.6 Watts
Idle mode: 250 mW (WLAN associated)
Idle mode: 100 mW (WLAN unassociated)
Radio off: 75 mW (WLAN unassociated)
Receive: 230 mW
USB selective suspend: 17 mW
ACPI and PCI Express bus compliant power management
802.11 compliant power saving mode
Supports USB selective suspend and resume of the Bluetooth component through the USB control
signals.
802.11b
DA - 14983 North America — Version 1 — May 28, 2014
HP ProDesk 405 G2 Microtower Business PC
2.402-2.482 GHz
4.9 - 4.95 GHz (Japan)
5.15 - 5.25 GHz
5.25 - 5.35 GHz
5.47 - 5.725 GHz
5.825 - 5.850 GHz
Page 39