Setting The Time Of Day; Setting The Minute Minder - Hotpoint UD47 Instructions For Installation And Use Manual

Electronic Clock & Automatic Oven Timer
Operation
Note 1 When the Minute Minder has been set, the time remaining can be checked at any
time by simply pressing the Minute Minder button.
Note 2 If necessary the Minute Minder can be cancelled before the tone sounds by pressing
and holding the Minute Minder button and then at the same time turning the "+/–"
knob to the "-" position until 0.00 appears in the display window.
10

SETTING THE TIME OF DAY

Step 1 Make sure all oven controls are turned Off.
Step 2 Check the electricity supply to the cooker is turned on.
Step 3 When switched on the display will show 0.00 and the Auto symbol,
flashing intermittently.
Step 4 Press & hold in both the Cook Period & End Time buttons together.
Step 5 With the Cook Period & End Time buttons still held in, turn the "+/-" knob
to set the correct time of day.
Step 6 Release all the buttons simultaneously.
THE TIME OF DAY IS NOW SET.
To change the time of day repeat Steps 4, 5 & 6 above.
Note: You cannot adjust the time of day if the timer has been set for an
Auto Cooking Programme.

SETTING THE MINUTE MINDER

Step 1 Ensure the time of day is set correctly.
Step 2 Press and hold the Minute Minder button.
Step 3 With the Minute Minder button held in, set the required Minute Minder
period using the "+/–" knob. A 'bell' symbol will light up.
Release all buttons and the timer display will revert back to the time of day.
The 'bell' symbol will remain lit to signify that a Minute Minder period has been
set.
At the end of the set time an audible tone will be heard, and the 'bell' symbol will
disappear.
Step 4 To cancel the audible tone press the Minute Minder button.