Fujitsu fi-4220C Operator's Manual page 21

5. Adjust the side guides to the width of the documents.
Move the side guides so that they touch both sides of the documents.
If there is any space between the side guides and the edges of documents, the scanned image
may be skewed.
HINT
6. Start up the scanner application, and scan the document.
For details on how to scan documents using the ScandAll 21 application, refer to "1.4 Scan-
ning Documents" (page. 7).
1.2 Loading Documents on the ADF for Scanning
The stacker prevents document sheets from dropping after they are
scanned.
Lift the paper stop and swing it forward by inserting your fingertips
into the indentaitons on the scanner as shown in the figure below.
Indentation
fi-4220C Image Scanner Operator's Guide
Side guide
1
5