Electrical Connection - Hotpoint SX995X Instructions For Installation And Use Manual

Hotpoint electric oven instructions for installation and use model sx995x

Hide thumbs

Table Of Contents

Table of Contents

Electric connection

Appliances with a three-pole power supply cable are

designed to operate with alternated current at the supply

frequency and voltage indicated on the data plate (at the

bottom of the oven dashboard). The earthing conductor

of the cable is the yellow-green conductor.

Connecting the power supply cable to the mains

The appliance must be directly connected to the mains

using an omnipolar circuit-breaker with a minimum

contact opening of 3 mm installed between the appliance

and the mains, suitable for the load indicated and

complying with current directives (the earthing wire must

not be interrupted by the circuit-breaker).

The power supply cable must be positioned so that it

does not exceed 50°C more than room temperature at

any point of its length.

Before making the connection check that:

the limiter valve and the home system can support

the appliance load (see data plate);

the power supply system has an efficient earthing

connection which complies with the provisions of

current regulations;

the socket or omnipoar circuit-breaker is easily

accessible once the cooker has been installed.

NOTE: do not use reducers, adaptors or shunts as they

could cause overheating and burns.