Canon iX7000 Series On-Screen Manual page 94

Tips on How to Use Your Printer
Back side Image Show-through and paper curling are reduced.
Not only enhancing colors but also clear ink reduces back side images to show-through, which
often occurs when printing on both sides of the paper. In addition, reduces paper curling which
often occurs when printing on plain paper.
Note
Notes after printing
Since plain paper is coated with the clear ink, any pencil marks made in the margin of the paper
may not come off easily with use of an eraser after it is printed out.
Printing on special paper: How to print with optimal quality!?
Tip!: Check the printer status before printing!
Is the Print Head OK?
If print head nozzles are clogged, print will be faint and papers will be wasted. Print the nozzle
check pattern to check the Print Head.
When Printing Becomes Faint or Colors Are Incorrect
See
Is the inside of the printer smeared with ink?
After printing large quantities of paper or performing borderless printing, the area where papers
go through may get smeared with ink. Clean the inside of your printer with Bottom Plate
Cleaning.
Refer to the on-screen manual:
Tip!: Check how to load the paper correctly!
Is the paper loaded in the correct orientation?
Load paper in the Cassette, Rear Tray, or Manual Feed Slot of the Front Tray in the correct
orientation.
Cassette
Load paper in the
Cassette with the print
side facing down.
Is the paper loaded in the proper paper source?
Load paper in the Cassette, the Rear Tray, or in Manual Feed Slot of the Front Tray, depending
on the size or type of paper.
.
Advanced Guide .
Rear Tray
Load paper in the Rear Tray
with the print side facing you.
Manual Feed Slot
Load paper in the Manual Feed Slot
of the Front Tray with the print side
facing down.
Page 94 of 468 pages