SONOS BRIDGE
• Be sure that your cable/DSL modem is connected to the router's WAN (Internet) port.
• Temporarily remove any other components that are wired to your network.
• Connect an Ethernet cable from the computer directly to the back of the BRIDGE, and then connect another Ethernet
cable from the BRIDGE directly to one of the LAN ports on your router.
• When you make a change to your network configuration, you may need to power cycle the BRIDGE by unplugging the
power cord, and then plugging it back in.
• If you are not using a router, you can visit our Web site at http://faq.sonos.com/norouter for more information.
Important Safety Information
Read these instructions.
1.
Keep these instructions.
2.
Heed all warnings.
3.
Follow all instructions.
4.
Do not use this apparatus near water.
5.
Clean only with dry soft cloth. Household cleaners or solvents can damage the finish on your Sonos components.
6.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
7.
Protect the power cable from being walked on or pinched, particularly at plugs, convenience receptacles, and the point
8.
where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
9.
7