SONOS BRIDGE
• Use a SONOS BRIDGE to connect the Sonos system to your home network— just connect a BRIDGE to your router using
a standard Ethernet cable and then you can add additional Sonos components to your music system wirelessly.
• Use a SONOS BRIDGE to extend the wireless range of your Sonos system — stream music wirelessly to a remote
location by placing a BRIDGE in between a Sonos component in a remote location and the rest of your Sonos system.
New to Sonos?
It takes just a few steps to get your Sonos system up and running (the steps below are fully explained in the QuickStart Guide
packaged with your BRIDGE) —
• Connect a Sonos component to your broadband router using an Ethernet cable (supplied).
• Place other Sonos component(s) in the room(s) of your choice.
• Install the software and follow the prompts to add the Sonos component(s) and set up access to your music files.
• Add a Sonos controller to your music system.
Once you've set up your music system, you can add additional Sonos components any time.
Adding to an existing Sonos system?
Sonos can be easily expanded room by room. If you are adding this BRIDGE to an existing Sonos music system, you can turn
directly to "Adding to an Existing Sonos System" on page 3.