Troubleshooting; Specifications - Siemens Gigaset A18H User Manual

Table of Contents

Advertisement

Troubleshooting

The display is blank.
1. The handset is not switched on.
¥
a
Press
and hold the End Call key.
2. The batteries are empty.
¥
Charge or replace the batteries (page 6).
The handset does not respond to a key press.
The keypad lock is activated.
¥
Press and hold the pound key
(page 10).
Ä
Base Search
and
is flashing on the display
screen.
1. The handset is outside the range of the base
station.
¥
Reduce the distance between handset/
base station.
2. The handset has been de-registered.
is flashing on the display screen.
Register
¥
Register the handset (page 12).
3. The base station is not switched on.
¥
Check the base station power cord.
Handset does not ring.
The ring tone is switched off.
¥
Activate the ring tone (page 14).
The other party cannot hear you.
You have pressed the
handset is on hold.
¥
i
Press the
key or the left display key to
switch on the microphone again.
You hear an error tone when keying an
input.
Action has failed/invalid input.
¥
Repeat the operation.
Watch the display and refer to the operating
instructions, if necessary.
#
Please
i
j
or
key. The

Specifications

Recommended batteries
Nickel-metal hydride (NiMH):
The handset is supplied with the author-
ized AAA batteries.
Handset operating times/charging
times
Capacity
550 mAh
Standby time
Approx. 300 hours
(12.5 days)
Talk time
Approx. 10 hours
Charge time
Approx. 10 hours
The operating and charge times apply only
when using the recommended batteries.
General specifications
DECT 6.0
is supported
No. of channels
60 duplex channels
Radio frequency
range
1920–1930 MHz
Duplex method
Time multiplex, 10 ms
frame length
Channel grid
1728 kHz
Bitrate
1152 kbit/s
Modulation
GFSK
Language code
32 kbit/s
Transmission
10 mW, average power per
power
channel
Range
up to 984 feet outdoors,
up to 165 feet indoors
Charging cradle
power supply
110 V ~/60 Hz
Environmental
+41°F to +113°F;
operating condi-
20% to 75% relative
tions
humidity
Dialing mode
DTMF (tone dialing)/DP
(pulse dialing)
Appendix
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents