Table of Contents
Advertisement
Host Name: Enter a hostname if it was provided by the ISP (Default: Wireless_Router).
Domain Name: Enter a Domain Name if it was provided by the ISP (Default: Router).
NTP Server(option): Enter a NTP Server IP Address.
Set Time Zone: Select the time zone of the country you are currently in. The router will set
its time based on your selection.
Daylight Saving: The router can also take Daylight savings into account. If you wish to use
this function, you must check/tick the enable box to enable your daylight saving configuration.
NAT: You can select to enable NAT function.
Administrator Settings
Use this menu to restrict management access based on a specific password. By default, there
is no password. So please assign a password to the Administrator as soon as possible, and
store it in a safe place.
Passwords can contain from 3-12 alphanumeric characters, and are case sensitive.
Administrator Time-out - The amount of time of inactivity before the Wireless Broadband
Router will automatically close the Administrator session. Set this to zero to disable it.
Remote Management - By default, management access is only available to users on your
24
Advertisement
Table of Contents
