Table of Contents
Advertisement
• If you decide to use IP address from Wireless Router, select "Obtain an IP
address automatically".
• If you decide to use the IP address you are desired, select "Use the following
IP address". Make sure enter correct addresses in "IP Address" and "Subnet
Mask" fields.
• You must set Wireless Router's IP address as "Default Gateway".
• If the DNS Server fields are empty, select "Use the following DNS server
addresses" and enter the DNS address is provided by your ISP, then click "OK".
Checking TCP/IP Settings for Windows XP
a)
Click "Start", select "Control Panel
Area Connection" then select "Properties". The window shown as below
will appear.
Network Connection" and right click "Local
16
Advertisement
Table of Contents
