Pentair Pool Products Amerlite Owner's Manual

Pentair Pool Products Amerlite Owner's Manual

Amerlite underwater light owner's manual
Hide thumbs Also See for Amerlite:

Advertisement

Quick Links

Amerlite
READ AND FOLLOW ALL INSTRUCTIONS
SECTION I.
Installing Light Fixture During New Pool Construction ..........................................................................3
SECTION II. Replacing light fixture in existing pool ..............................................................................................4
SECTION III. Replacing a lamp only .......................................................................................................................5
SECTION IV. Amerlite Parts Breakdown ...............................................................................................................7
SECCIÓN I.
Instalación del accesorio para lámpara durante la construcción de una piscina nueva .................. 11
SECTION I.
Installation de l'appareil d'éclairage lors de la construction d'une nouvelle piscine ....................... 19
This underwater light must be installed by a licensed or certified electrician in accordance with the
National Electrical Code and all applicable local codes and ordinances. Improper installation will
create an electrical hazard which could result in death or serious injury to pool users, installer, or
others due to electrical shock, and may also cause damage to property. Read and follow the specific
instructions below.
Before installing this product, read and follow all warning notices and instructions which are included. Failure to
follow safety warnings and instructions can result in severe injury, death, or property damage.
Call (800) 831-7133 for additional free copies of this manual.
Attention Installer.
This manual contains important information about the installation, operation and safe use of this
product. This information should be given to the owner/operator of this equipment.
Certain product labeling has been provided in French and Spanish!
Install these labels over the corresponding English text label if the personnel operating or servicing the product is fluent in either of these languages.
If more than one language is spoken by personnel operating or servicing this equipment, then install the additional labels of the required language adjacent to
the English text label. If insufficient space is available on the product to install multiple labels, then these labels should be placed on a placard or sign and
posted near the equipment where it is visible to all who operate or service this equipment.
Before installing the label, remove all dirt or grease from the surface that the labels will be installed upon using a mild detergent solution.
Pentair Water Pool and Spa, Inc.
1620 Hawkins Ave., Sanford, NC 27330 • (800) 831-7133 • (919) 566-8000
10951 West Los Angeles Ave., Moorpark, CA 93021 • (800) 831-7133 • (805) 553-5000
Visit www.pentairpool.com or www.staritepool.com
Rev. G • Rev. G • Rév. G 10-29-07
®
Underwater Light Owner's Manual

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

Table of Contents

Risk of Electrical Shock or Electrocution

Important Notice

Product Labeling

DANGER
WARNING
1
Listed
P/N • Núm/Pte. • Réf. 99360000

Advertisement

Table of Contents
loading

Summary of Contents for Pentair Pool Products Amerlite

  • Page 1 Installing light fixture during new pool construction ................3 SECTION II. Replacing light fixture in existing pool ....................4 SECTION III. Replacing a lamp only ........................5 SECTION IV. Amerlite Parts Breakdown .......................7 SECCIÓN I. Instalación del accesorio para lámpara durante la construcción de una piscina nueva ....11 SECTION I.
  • Page 2 Trademarks and Disclaimers: The Pentair Pool Products logo, Because reliability matters most and Amerlite are registered trademarks of Pentair Water Pool and Spa, Inc. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products.
  • Page 3 2. To be certain that the pool’s electrical system meets all applicable requirements, the electrician should also consult the local building department. 3. Use only Pentair Water Pool and Spa wet niches to insure proper bonding and grounding connections. B. Steps to perform after the electrical system requirements are met.
  • Page 4 2. To be certain that the pool’s electrical system meets all applicable requirements, the electrician should also consult the local building department. 3. Use only Pentair Water Pool and Spa wet niches to insure proper bonding and grounding connections. B. Replacing light fixture after electrical system requirements are met.
  • Page 5 2. To remove light assembly, remove the special pilot screw at top of face ring, remove light assembly from niche, and place assembly on deck. WARNING Be sure to keep the special pilot screw from this underwater light. This screw mounts and electrically grounds the housing securely to the mounting ring and wet niche.
  • Page 6 4. Disassemble light fixture and remove bulb. Remove and discard old gasket; see Figure 2. 5. Install new gasket during reassembly of light, Pentair Water Pool and Spa part number 79101600. WARNING Never operate the underwater light for more than 10 seconds unless it is totally submerged in water.
  • Page 7 Bolt and nut are to be tightened at approx. 45 degrees from the pilot screw between the tabs on the face ring as shown above. SECTION IV. Amerlite Replacement Parts Item Part Description 79212100 Face ring, large plastic, for S/S only, white...
  • Page 8 SAVE THESE INSTRUCTIONS © 2007 Pentair Water Pool and Spa, Inc. All rights reserved. This document is subject to change without notice. 1620 Hawkins Ave., Sanford, NC 27330 • (800) 831-7133 • (919) 566-8000 10951 West Los Angeles Ave., Moorpark, CA 93021 • (800) 831-7133 • (805) 553-5000 P/N •...

Table of Contents