Seagate 1AYBA4 Installation And Setup page 18

4. Getting Help
3. Attach the Seagate Wireless Plus to your Mac.
4. Install the NTFS driver included on the Seagate Wireless Plus.
You can also find this driver on the
5. On your Mac, open Finder, click Go, and then click Utilities.
6. Double-click Disk Utility.
7. Select the Seagate Wireless Plus drive or Seagate USB.
8. Click the Erase button.
9. For Format type, select Windows NT File System (do not select the compressed
option).
10. Enter a recognizable name, for example, Seagate Wireless Plus drive.
This is the name that appears on the Desktop when you connect the Seagate Wireless
Plus to your Mac.
The Seagate Wireless Plus should be ready to use withing a few minutes. You may need
to eject the device by dragging it to the trash can and then disconnect and reconnect it to
gain full read and write capability.
11. You can now setup the Seagate Wireless Plus for your use.
Remember: If you are using Time Machine, do not allow the program to use the Seagate
Wireless Plus drive for backup.
The Seagate Wireless Plus shuts down by itself
Your Seagate Wireless Plus includes a power-save feature, which means that it enters a
standby state after 5 minutes of inactivity. Your device automatically returns to active mode
whenever someone attempts to access it.
I know the Seagate Wireless Plus is broadcasting, but I can't stream from it
Up to five wireless-enabled devices can stream from the Seagate Wireless Plus at one
time.To see how many devices are currently connected to the Seagate Wireless Plus, open
the Seagate Media app on a connected device and tap Users.
The Seagate Wireless Plus beeps when I plug it in to my computer
The battery is low. Connect your Seagate Wireless Plus to a power outlet using the included
USB to DC adapter and charge the device.
Seagate Wireless Plus User Guide
Seagate download page.
11