Loading Media Onto The Seagate Wireless Plus - Seagate 1AYBA4 Installation And Setup

2. Setting up and Using Your Seagate Wireless Plus
2. Open the network or wireless settings on your computer or mobile device.
Note: See the user documentation for your computer or mobile device for the most up-to-
date instructions on connecting to a wireless network.
• Apple devices—choose Settings > Wi-Fi.
• Android devices—choose Settings > Wireless & Networks > Wi-Fi.
• Mac Computer—select Apple > System Preferences and then select Network.
• PC—enable the wireless connection.
3. Select Seagate Wireless from the list of networks.
This establishes a wireless connection between your device and the Seagate Wireless
Plus.
4. Open the Seagate Media app.
• On the home page of your mobile device, tap the Seagate Media app icon.
• On your computer, open a browser and type "www.seagatewirelessplus.com" or any
other URL in the address bar.
The Seagate Wireless Plus main page appears with the Getting Started tutorial ready for
viewing.
5. Follow the steps in the Getting Started tutorial to verify that you can view a video and
connect to the Internet.
Your devices are now ready to stream the sample media packaged with your Seagate
Wireless Plus.

Loading Media onto the Seagate Wireless Plus

1. Connect the supplied USB 3.0 cable to the Seagate Wireless Plus and the USB 3.0 or 2.0
port on your computer.
Notes:
If you are connecting to a Mac, do not allow Time Machine to use the Seagate Wireless
Plus for backup because it will attempt to reformat the drive. If your device has been
reformatted, see
The Seagate Wireless Plus is not available as a wireless connection to your other devices
while it is physically connected to your computer.
The device's name appears on your computer as Seagate Wireless xxx where xxx
represents the last three digits of the device's serial number.
Seagate Wireless Plus User Guide
I mistakenly reformatted the drive for my Mac.
4