Table of Contents
Advertisement
SiriusXM Vehicle Connect Tuner Control
(optional tuner and service required)
Channel skip setting
You can register the channel you wish to skip.
1
Select Satellite Radio source
2
Enter Menu List mode
Press the [MENU] button.
3
Enter the Channel skip setting mode
Turn the [VOL] knob and press it when the
desired item is displayed.
>
>
Select "Settings"
"Channel Skip"
"Skip CH
edit".
4
Select the category of the channel you wish
to skip
Turn the [VOL] knob to select a category, and
then press the [VOL] knob.
5
Select the channel you wish to skip
Turn the [VOL] knob to select a channel, and
then press the [VOL] knob.
The selected channel skip setting is turned on and
off alternately each time you press the [VOL] knob.
"*" is indicated for the selected item name.
6
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
⁄
•
Channels 0 and 1 cannot be registered to skip.
69
|
KDC-X996/ KDC-BT952HD
Clearing the channel skip setting
You can clear the skip setting for all the selected
channels together.
1
Select Satellite Radio source
2
Enter Menu List mode
Press the [MENU] button.
3
Enter the Clearing the channel skip setting
mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "Settings"
>
"Channel Skip"
>
"CH All
Clear".
4
Clear the channel skip setting
Turn the [VOL] knob to select "YES", and then
press the [VOL] knob.
"Completed" is displayed.
5
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
Parental Lock setting
You can turn on/off Parental Lock for each channel.
1
Select Satellite Radio source
2
Enter Menu List mode
Press the [MENU] button.
3
Select the Parental lock item
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "Settings"
>
"Parental Lock".
4
Enter the passcode
Operation type
Operation
Selection of numbers.
Turn the [VOL] knob and press the [VOL]
knob.
Selection of column
Turn the [VOL] knob and press the [VOL]
knob.
Determination of passcode Press the [VOL] button for at least 1
second.
⁄
• The passcode is set to "0000" as default.
For how to change the passcode, refer to
<Parental Lock
passcode setting> (page 71)
.
•
You can enter the passcode using the remote control.
5
Select the Lock channel edit item
Turn the [VOL] knob to select "Channel Edit",
and then press the [VOL] knob.
A category list is displayed.
6
Select the category of the channel subject to
Parent Lock setting
Turn the [VOL] knob to select a category, and
then press the [VOL] knob.
The list of the channels in the selected category is
displayed.
7
Set Parental Lock
Turn the [VOL] knob to select a channel, and
then press the [VOL] knob.
Parental Lock for the selected channel is turned on
and off alternately each time you press the [VOL]
knob.
"*" is indicated for the selected channel.
8
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
⁄
• If a channel for which Parental Lock is turned on is
selected, a passcode input screen appears. Programs
on the selected channel can be received only when the
input passcode is correct.
•
Parental Lock cannot be set for channels 0 and 1.
Clearing the Parental Lock setting
You can clear the Parent Lock setting for each
channel.
1
Select Satellite Radio source
2
Enter Menu List mode
Press the [MENU] button.
3
Select the Parental lock item
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "Settings"
>
"Parental Lock".
4
Enter the pass code
Operation type
Operation
Selection of numbers.
Turn the [VOL] knob and press the [VOL]
knob.
Selection of column
Turn the [VOL] knob and press the [VOL]
knob.
Determination of passcode Press the [VOL] button for at least 1
second.
⁄
• The passcode is set to "0000" as default.
•
You can enter the passcode using the remote control.
5
Select the Lock channel clear item
Turn the [VOL] knob to select "Lock CH All
Clear", and then press the [VOL] knob.
6
Clear the Parent Lock setting
Turn the [VOL] knob to select "Yes", and then
press the [VOL] knob.
"Completed" is displayed.
7
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
|
English
70
Hide quick links:
Advertisement
Table of Contents
