Special Features; How To Use Accessories - Eureka 4230 Series Owner's Manual

New features make your vacuum easy to use without bending.
Automatic Cord Rewind
Pull out cord to desired length. Do not pull
past red line. Press button to rewind cord.
Telescoping Handle
Push down release button and pull out
handle to desired height.
Carpet Height Adjustment
Use foot to raise or lower. Use the lowest
setting for best cleaning on carpet. If vacuum is hard to push, raise the setting.
Brush roll must reach the carpet for effective cleaning. For bare floors, use bare floor setting.
Replace end of wand into wand retainer after using accessories.
Telescoping Wand
Twist coupling and pull out wand to desired
length; twist to lock. Push tool onto wand.
Crevice Tool
Use for baseboards and corners.
Dusting Brush
Use for furniture, drapes and vents.
Bare Floor Nozzle and Wand
(with some models or available for purchase)
Use for bare floors.
Turbo Nozzle and Stair Hose
(with some models or available for purchase)
Use for furniture and stairs.
Make sure vacuum is below you,
pushed against the bottom step.
1) If model has additional stair hose, attach
to end of wand.
2) Attach turbo nozzle to the end of wand
or hose.
NOTE: Hose length can be increased by
releasing the hose from the hose retainer
on back of unit. Reposition hose inside
hose retainer after using accessories.
Eureka Customer Service HELPLINE 1-800-282-2886

Special Features

How to Use Accessories

Handle must be in upright position.
www.eureka.com 3 3