Self-Diagnosis Display; Warning Messages - Sony Cyber-shot DSC-HX400 Help Manual

Self-diagnosis display

If a code starting with a letter of the alphabet appears, the self-diagnosis function on this
product is working. The last two digits (indicated by □□) will differ depending on the state of this
product.
If you cannot solve the problem even after trying the following corrective actions a few times,
this product may need repair. Contact your Sony dealer or local authorized Sony service facility.
C:32:□□
C:95:□□
There is trouble with the product's hardware. Turn the power off and on again.
C:13:□□
This product cannot read or write data on the memory card. Try turning off and on this
product again, or taking out and inserting the memory card several times.
An unformatted memory card is inserted. Format the memory card.
The inserted memory card cannot be used with this product, or the data is damaged. Insert a
new memory card.
E:61:□□
E:62:□□
E:91:□□
A product malfunction has occurred. Initialize this product, then turn the power on again.
E:94:□□
There is a malfunction when writing or deleting data. Repair is required. Contact your Sony
dealer or local authorized Sony service facility. Be prepared to give all numbers in the error
code beginning from the E.
Troubleshooting Messages

Warning messages

Set Area/Date/Time.
Messages
183