Contents Introduction..................3 Function overview................3 Hardware overview................3 Basics....................5 Charging the battery................5 Battery and power management............5 Turning the headset on and off............5 Adjusting the volume.................5 Resetting the headset................6 Wearing instruction................6 Getting started................7 Preparing to use your headset with a Bluetooth® device....7 Using your headset..............8 Using your headset to handle phone calls.........8 Using your headset to listen to music..........8 Using your headset with two devices simultaneously.......8...
Introduction Function overview Your Stereo Bluetooth® Headset SBH80 is designed to make life more convenient when you're on the go. You can use it together with an Android™ powered device such as a phone or tablet, or with a Bluetooth® compatible device such as a non- Android phone, a computer or a music player.
Basics Charging the battery Before using the Stereo Bluetooth® Headset SBH80 for the first time, you need to charge the headset for approximately 2.5 hours. Sony chargers are recommended. To charge your headset Plug one end of the USB cable into the charger or into the USB port of a computer.
Resetting the headset Reset the headset if it behaves unexpectedly. Resetting the headset removes all information about paired devices. To reset the headset Turn off the headset, then connect the charger so that the headset starts to charge. Press and hold down until the headset vibrates briefly.
Bluetooth® device: Scan for Bluetooth® devices, then select Stereo Bluetooth® Headset SBH80 in the list of available devices. Bluetooth® device: Follow the pairing instructions that appear on the screen. To automatically pair your headset with a Bluetooth® device Bluetooth®...
Using your headset Using your headset to handle phone calls Use the headset to handle incoming calls, for example, to answer or reject a call. To answer a call with the headset • When you hear an incoming call signal, press To end a call •...
In Multipoint mode, the headset remembers both paired devices. You can reconnect previously paired devices easily by manually switching back to Multipoint mode from Singlepoint mode. A previously paired device can then be detected automatically. You can only connect to a maximum of two devices in Multipoint mode. If you pair the headset with a third device, the first paired device gets disconnected.
Troubleshooting I cannot answer a second call • Make sure that your calling device supports the Bluetooth® headset profile. • Make sure that the correct calling device is selected. Music from another device does not play in the headset • Make sure that the music-playing device is paired with the headset.
Prior to use, please read the Important information leaflet separately provided. This User guide is published by Sony Mobile Communications AB or its local affiliated company, without any warranty. Improvements and changes to this User guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Sony Mobile Communications AB at any time and without notice.
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any change or modification not expressly approved by Sony may void the user's authority to operate the equipment.