Bluetooth Services - D-Link DBT-122 Manual

Bluetooth Configuration

Bluetooth Services

Option Two:
1. From the Windows Control Panel, select Printers > Add Printer >
Next > Local printer > Next.
2. On the Select the Printer Port screen of the wizard:
a) Select Create a new port
b) In the Type shortcut menu, select Bluetooth Printer Port, and
3. On the next screen, select the printer by name, and then click
Connect.
4. Install the driver: when asked to select a printer make and model, do
so.
the driver disk for the printer, and then navigate to the drive and
directory that contain the driver initiation file (*.inf) for the printer.
5. To complete the installation, follow the on-screen instructions.
Delete a printer:
Click Start > Settings > Printers, right-click the printer to be deleted, and then select
Delete from the shortcut menu.
Or
In Entire Bluetooth Neighborhood, right-click an installed Bluetooth printer and select
Delete Printer from the shortcut menu.
Bluetooth Services
Common Configuration Settings
These properties can be set individually for each Bluetooth service:
•
Service Name-the default name of each service can be changed.
•
Secure Connection-requires that remote devices provide proof of
identity and that all data be encrypted.
•
Startup Automatically-starts the service automatically when
Bluetooth is started.
•
Notifications-provides visual and/or audio notification that a remote
device is attempting to connect (or has connected) to a service on
this computer.
then click Next.
If your printer is not in the list of options, click Have Disk..., insert
(cont'd)
36