Harman Home Heating MARK III Installation And Operating Manual page 3

Magnafire series coal stoves
Hide thumbs Also See for MARK III:
Table of Contents

Advertisement

Thank you for purchasing a Harman Magnafire coal stove. The Magnafire series has been designed
and built to last. Whether you're heating a room or heating your whole house, you've made the right
choice. Please read this entire instruction manual before attempting to install or operate your new stove.
If you have further questions regarding your new stove, contact your Harman dealer. Follow these in-
structions and you will have many years of warmth and comfort enjoying your new coal stove.
If you are a first-time coal burner, keep in mind that you will not have instant success with maintaining
a fire. No one does. Following these instructions should help you with the basic principals.
THis appliance is also approved for installation into a shop.
Stove is hot while in operation. Keep combustibles such as furniture, fuel, and
draperies at least 36 inches away from the appliance.
Do not leave small children unattended while in the room with this heater.
Always wear gloves when attending to the stove.
This stove is not an incinerator. Do not burn garbage, painted or treated wood, or
flammable liquids like gasoline kerosene, or engine oil.
Introduction
Safety Notice:
Magnafire Series Coal Stoves
Please copy your serial number, from
the label on the back of your stove, to
the box below.
Listed by: OMNI-Test Laboratories, INC
Report # 135-S-07-4
3

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for Harman Home Heating MARK III

Table of Contents