Wear a full face shield if you are producing metal filings or wood chips. Wear an ANSI approved dust mask or respirator when working around metal, wood, and chemical dusts and mists. SKU 92921 For technical questions, please call 1-800-444-3353 Page 2...
Page 3
21. This Impact Wrench should only be used with impact sockets and extensions. Using any other accessories can cause the accessories to break, causing permanent damage to the unit and severe injury to the operator. SKU 92921 For technical questions, please call 1-800-444-3353 Page 3...
Unpacking When unpacking, check to make sure the parts listed on page 8 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible.
Page 5
When the nut is loosened, release the Trigger (30). Turn off the air compressor and disconnect the hose. If needed, remove the nut from the socket. SKU 92921 For technical questions, please call 1-800-444-3353 Page 5...
Air Inlet (40) is facing up. Squeeze the Trigger (30), and place one or two drops of oil into the Air Inlet (40). Squeezing the Trigger (30) allows the oil to circulate in the motor. SKU 92921 For technical questions, please call 1-800-444-3353...
REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. SKU 92921 For technical questions, please call 1-800-444-3353 Page 7...