Summary of Contents for Central Pneumatic Earthquake 92453
Page 1
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.
Use safety equipment. A dust mask, non-skid safety shoes and a hard hat must be used for the applicable SKU 92453 For technical questions, please call 1-800-444-3353. conditions. Wear heavy-duty work gloves during use. Always wear eye protection. Wear ANSI- approved safety goggles.
90 psi. Over pressurizing the tool may cause bursting, abnormal operation, breakage of the tool or serious injury SKU 92453 For technical questions, please call 1-800-444-3353. to persons. Use only clean, dry, regulated compressed air at the rated pressure or within the rated pressure range as marked on the tool.
Attach all accessories properly to the tool before connecting the air supply. A loose accessory may detach or break during operation. SKU 92453 For technical questions, please call 1-800-444-3353. Obey the manual for the air compressor used to power this tool.
To reduce vibration, maintain tool as explained in this manual. If abnormal vibration occurs, stop immediately. SAVE THESE INSTRUCTIONS. SKU 92453 For technical questions, please call 1-800-444-3353. FUNCTIONAL DESCRIPTION Specifications Maximum Air Pressure 90 PSI Air Inlet 1/4”...
Note: If an automatic oiler system is not used, add a few drops of Pneumatic Tool Oil to the airline connection before operation. Add a few more SKU 92453 For technical questions, please call 1-800-444-3353. drops after each hour of continual use.
SERIOUS INJURY FROM ACCIDENTAL OPERATION: Turn off the tool, detach the air supply, safely discharge any residual air SKU 92453 For technical questions, please call 1-800-444-3353. pressure in the tool, and release Trigger before performing any inspection, maintenance, or cleaning procedures.
If tool still does not have sufficient force at maximum pressure and sufficient airflow, then a larger tool may be required. SKU 92453 For technical questions, please call 1-800-444-3353. 10. Once nut is tightened, release Trigger. Turn off the air supply and disconnect the hose.
Other lubricants may damage the mechanism and may be highly flammable, causing an explosion. SKU 92453 For technical questions, please call 1-800-444-3353. Cleaning, Maintenance, and Lubrication Note: These procedures are in addition to the regular checks and maintenance explained as part of the regular operation of the air-operated tool.
3. Damaged valve or housing. 4. Dirty, worn or damaged valve. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect air supply before service. SKU 92453 For technical questions, please call 1-800-444-3353. Troubleshooting Likely Solutions 1. Check for loose connections and make sure...
Regulator Knob Regulator Knob Screw Trigger Trigger Pin End Plate Gasket Rear Motor Bearing Retainer Rear Motor Bearing Rear End Plate Rotor SKU 92453 For technical questions, please call 1-800-444-3353. PARTS LIST Q’ty Part Description Cylinder Rotor Blade Cylinder Pin...
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. SKU 92453 For technical questions, please call 1-800-444-3353. Page 13...
Page 14
90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.