Table of Contents
Advertisement
Troubleshooting
Problem
Picture is not clear
Night vision is not
working
White Light LEDs
do not turn on
White Light LEDs
turn on too
frequently
Bright spot in video
when viewing
camera at night
BNC connection
does not connect to
my TV
18
• Check the camera lens for dust, dirt,
and spiderwebs. Clean the lens with a
soft, clean cloth.
• Make sure that the cable run is within
the limitations specified in the section
'Cable Extension Options'.
• The night vision activates when light
levels drop. The area may have too
much light.
• Motion detection range is limited to
9 ft. (3m). It is recommended to install
the camera at a height of about
7 ft. (2.2m) to ensure that people and
objects will be detected.
• Move the camera to a different location
where normal nighttime traffic will not
trigger the motion detection.
• Changes in lighting conditions may
trigger the motion sensor. Adjust the
camera angle down to reduce exposure
to light, or move the camera to a
different location.
• Night vision reflects when pointing a
camera to a window. Move the camera
to a different location.
• Use a BNC to RCA adapter at the end
of the extension cable.
Solution
Advertisement
Table of Contents
