IBM N Series Hardware Manual page 58

Figure 4-3 shows the IBM N series N7950T configuration.
Figure 4-3 IBM N series N7950T configuration
Table 4-1 provides a list of features for the N7950T.
Table 4-1 N7950 Series features
FC Target
10 GbE
GbE
6 Gb SAS
FC Initiator
Flash Cache maximum
a. Depends on the DOT release
Figure 4-4 shows the IBM N series N7950T Slots and Interfaces Controller Module.
Figure 4-4 IBM N series N7950T Slots and Interfaces Controller Module
The N7950T includes the following features:
2 onboard I/O slots (vertical)
– NVRAM8 always goes into slot 2
– Special 8 Gb FC or 6 Gb SAS system board must be in slot 1
– Fibre Channel system board ports can be target or initiator
38
IBM System Storage N series Hardware Guide
Ports
48
40
a
52
72
128
16 GB