HP 12500 Quickspecs page 14

QuickSpecs
Configuration
HP FF 12518E DC Switch Chassis
2 - MPUx (Management Ports)
18 - I/O module slots
9 - Fabric module slots
Must select min 1 Management Module
Must select min 6 Power Supply
PEM included
Must select min 2 Fans
Must select Min 8 Fabric Modules
38U - Height Rack
Configuration Rules:
Note 1 If this Switch is selected at least one of these Power Supply is required: (Use #0D1 if switch is CTO)
JF429A - HP 12500 2000W AC Power Supply
Note 2 When Switches/Routers are Factory Racked, Then #B2B, or #B2C should be the Defaulted Power Cable option on the
Power Electrical Module. (See Drop down remark in the "Internal Power Supplies" section.)
Note 3 If HP CTO Switch Chassis is selected to be Rack Level Integration, Then the CTO Switch Chassis needs to integrate
(with #0D1) to the BW966A or BW968A HP Universal Rack Only. (Default to the BW966A.)
Note 4 If this Switch is selected at least one of these Power Supplies is required: (Use #0D1 if switch is CTO)
JC651A - HP 12500 1800W DC Power Supply
Note 5 Localization required on orders without #B2B or #B2C options.
Internal Power Supplies
12508 and 12504 - System (std 0 // max 6) User Selection (min 3 // max 6)
12508E - System (std 0 // max 8) User Selection (min 3 // max 8)
12518 - System (std 0 // max 12) User Selection (min 6 // max 12)
12518E - System (std 0 // max 16) User Selection (min 6 // max 16)
HP 12500 2000W AC Power Supply
HP 12500 1800W DC Power Supply
Configuration Rules:
DA - 13785 Worldwide — Version 24 — May 12, 2014
HP 12500 Switch Series
JG785A
See Configuration
Note: 3, 4
JF429A
See Configuration
Note:1
JC651A
See Configuration
Note:2
Page 14