Product Specification - Hotpoint EH10 Instruction Book

Installation
Siting the Cooker
Moving the Cooker
Note

Product Specification

Supply Voltage
Supply Frequency
Total Wattage
Grill Wattage
Main Oven Wattage
Left Front Hotplate
Left Rear Hotplate
Right Rear Hotplate
Right Front Hotplate
Grilling Area
Top Oven Capacity
Main Oven Capacity
External Dimensions
Excluding Handles
Weight
The cooker is designed to fit between kitchen
cabinets spaced 500mm apart. The space either side
need only be sufficient to allow withdrawal of the cooker
for servicing. It can be used with cabinets one side or
both as well as in a corner setting. It can also be used
free-standing.
This cooker is a class X appliance, as such adjacent
side walls which project above hob level, must not be
nearer to the cooker than 150mm and should be
protected by heat resistant material. Any overhanging
surface or cooker hood should not be nearer 650mm.
Before moving your cooker, switch off at the cooker
control unit, ensure that it is cool.
Open the grill door sufficiently to allow a comfortable
grip on the underside front edge of the oven roof,
avoiding any grill elements.
Take care in moving the cooker as it is heavy. Take
care to ensure that any floor covering is not
damaged.
230V AC Only
50Hz
9.9kW
2.3kW
2.2kW
1.65kW
1.0kW
1.65kW
1.0kW
Height 1240mm
240V AC Only
900cm
2
29 litres
49.9 litres
Width 500mm
Depth 600mm
48kg
50Hz
10.7kW
2.5kW
2.4kW
1.8kW
1.1kW
1.8kW
1.1kW
4