Power Wheels Jeep Hurricane T3264 Owner's Manual With Assembly Instructions page 14

Wheel Well
Fender
19
• Insert a screw through each wheel well and into each fender.
Tighten the screws.
Front Axle
20
• Turn both front axles torward the front end of the vehicle
until they drop into the axle slots.
K7112pr-0920
Front Axle Slot
Front
Axle
Post
21
• Fit a front axle cap onto the front axle post and hold it in place.
• Insert a screw through the large opening in the front axle cap
and the hole in the front axle. Tighten the screw.
• Repeat this procedure to fasten the bottom of the other front axle.
"Lug Nuts"
22
Note: There are front and rear wheels. The rear wheels have
a grooved hub while the front wheels do not.
• Locate a front wheel. Place the front wheel onto the front axle
with the "lug nuts" facing out.
14 14
Front Axle Cap
Front Wheel