Table of Contents
Advertisement
EVGA FTW3 Motherboard
1 - I/O Shield
Installs in the system case to block radio frequency
transmissions, protect internal components from dust, foreign
objects, and aids in proper airflow within the chassis.
3 - 2-Port SATA Power Cables
Allows a Molex power connector to adapt to a SATA power
connector.
1 - IEEE1394a (Firewire) Bracket
Provides one (1) additional IEEE1394a port to the back panel
of the chassis.
1 - 4-Port USB 2.0 Bracket
Provides four additional USB ports to either the front or back
panels of the chassis.
6 - SATA Data Cables
Used to support the SATA protocol and each one connects a
single drive to the motherboard.
1 - IDE Data Cable
Passes data between the IDE connection on the motherboard
and IDE device.
1 - 2-Way SLI Bridge
Bridges two (2) graphic cards together which allows for
2-Way SLI.
1 - 3-Way SLI Bridge
Bridges three (3) graphic cards together which allows for
3-Way SLI.
1 - Installation CD
Contains drivers and software needed to setup the
motherboard.
13
Advertisement
Table of Contents
