HP ProDesk 490 G2 Quickspecs page 33

QuickSpecs
Technical Specifications – Hard Disk and Solid State Storage
Weight
Bandwidth Performance
Latency
Power
Useful Drive Life
Environmental
(all conditions, non-condensing)
Regulations
* For solid state disk drives, GB means 1 billion bytes. 128GB is the unformatted capacity of this drive before a portion of the drive is reserved for
flash management features. Actual capacity will vary by content
** The product achieves a mean time between failure (MTBF) based on population statistics not relevant to individual units.
500GB 2.5" FIPS 140-2 SED Solid State Drive
Formatted Capacity
Architecture
Interface
Form Factor
Height
Width
Length
Weight (typical)
0.16 lb (73 g)
Sustained Sequential Read:
Sustained Sequential Write:
Random Read (4KB):
Random Write (4KB):
Read:
Write:
DC power requirement:
Total power consumption:
1.2 million device hours**
Operating Temperature:
Relative Humidity (operating):
Shock:
UL, CSA, EN 60950-2000, CISPR Pub 22 Class B, CNS 13438, AS/NZS
CISPR 22:2002 Class B, Korea KCC, CE Mark
500 GB
Self-Encrypting (SED) Solid State Drive with SATA interface.
Serial ATA (6.0 Gb/s)
2.5 inch
6.80 mm ± 0.20
69.85 mm ± 0.25
100.35 mm ± 0.25/0.20
<95 g (0.209 lb)
Worldwide — Version 1.8— May 22, 2014
HP ProDesk 490 G2 Microtower Business PC
Up to 450 MB/ss
Up to 260 MB/s
up to 46K IOPs
up to 56K IOPs
55ms (TYP)
55ms (TYP)
Min 4.5 V; Max 5.5 V
160 mW (Active) ; <85 mW; (Idle)
32° to 158° F (0° to 70° C)
5% to 95%
1,500 G/1.0 msec
Page 33