Care And Maintenance - Electrolux ELAP15 Manual

airCleanerOG.qxp_AirFilter_English 1/20/14 12:05 PM Page 11
ELAP45
CAUTION: Turn off the air cleaner
!
and unplug the electrical cord before
performing any maintenance
Filter Service life Cleaning Cycle
Washable 12 months Every 3
Cleancel
®
Pre-Filter
Washable 12 months Every 3
HEPA
Filter set
Washable 12 months Every 3
Anti-Odor
Carbon
Filter
Filter 12 months –
Cassette
The Check Filter indicator will signal when
to replace the Filter Cassette. The
replacement period will vary depending on
the hours of usage, air quality, and location
of the unit. However, in most cases of
normal use the filter will need to be
replaced annually. This Filter Cassette
should be disposed of when changed.
Filter Cassette replacement
1. Turn off the air cleaner and unplug the
electrical cord.
2. Remove the front panel by pulling gently
from the top portion of the panel.
3. Remove the Filter Cassette by gently
pulling out from the bottom and down
from the top.
4. Remove all the filters from the plastic
frame and dispose of the filters only.
Keep the frame.
.
How to clean
Clean with vacuum
months cleaner or soft
brush. Use warm
water when the
filter is very dirty.
Soak the filter into
months warm water for 30
minutes and dry it
in the shade for
24 hours.
Soak the filter in
months warm water for 30
minutes and dry it
in the shade for
24 hours.
–
Electrolux Customer Service 1-800-896-9756
FILTER REPLACEMENT
5. Remove the replacement filters from the
plastic bag and replace them.
6. Replace the front panel by hooking the
panel on the bottom of the unit.
7. Plug in air cleaner and press POWER
button until short "beep" sounds.
8. Press the RESET FILTER button by
gently inserting a paperclip into the
RESET FILTER hole on the
control panel. The light will
flash 5 times before a
"beep" sounds to indicate
the filter has been reset.

CARE AND MAINTENANCE

ELAP15, ELAP30, ELAP40, ELAP45
CAUTION: Turn off the air cleaner
!
and unplug the electrical cord before
performing any maintenance
Clean unit as necessary by wiping with a
dry, soft cloth; for stubborn stains, use a
warm, damp cloth.
Do not use volatile fluids such as
benzene, paint thinner or scouring
powder, as they may damage the surface.
Keep the unit dry.
Lightly vacuum air quality sensor
every three months.
.
11