Lighting Instructions - Napoleon P450RB Instruction Manual

7. LIGHTING INSTRUCTIONS

Ensuring burner controls are in
the off position, turn on the gas
Back Burner Lighting
Remove warming rack.
Turn back burner control
to high position.
Turn igniter knob clock-
wise several times or light
by holding a lit match to
the left side burner ports.
If ignition is not immediate,
turn the burner control off.
Wait 5 minutes.
The propane cylinder is equipped with an excess flow device. Unless all burners are
turned off prior to turning the cylinder on, only small flames will be achievable.
Do not use back burner while operating left, centre or right burner.
Open lid.
supply valve.
Main Burner Lighting
Turn left burner control
to high position.
Turn igniter knob clock-
wise several times or light
by inserting a lit match
through a lighting hole.
If ignition is not immediate,
turn the burner control off.
Wait 5 minutes.
With the left burner operat-
ing in the high position, turn
the centre burner to high,
then the right burner to high.
CENTRE
BURNER
REAR
LEFT IGNITOR BURNER
BURNER
LIGHTING PORT
HOLE
Side Burner Lighting
Open burner cover.
Turn side burner control
to high position.
Push igniter several times
or light by holding a lit
match against the burner.
If ignition is not immedi-
ate, turn the burner
control off. Wait 5
minutes.
RIGHT
BURNER
7