Advertisement
Twin R Core Transformers (NS9100ES)
The digital processing and control circuits can introduce noise to the
power supply voltage, which can trigger subtle audio distortions. To protect the
audio circuitry, the DVP-NS9100ES uses two separate power transformers: one
for the servo and digital system and another just for the analog audio and video
systems. The analog power supply is further divided, with independent
transformer windings for analog audio and analog video. This reduces
interference between audio and video circuitry to a bare minimum. In addition,
power supply regulation on the audio circuit board itself helps establish stable
operation for the audio D/A converters.
Power transformer cores and windings can vibrate and degrade the sound,
radiating 60 Hz hum into nearby audio circuits. That's why Sony chose an R-
Core design. The R stands for round. Not only is the core round, it has a
cylindrical cross section, enabling the transformer windings to be wrapped
without the voids or gaps that permit vibration. This results in far less radiation,
far less hum. These two transformers are mounted on a non-magnetic copper
plate, which is quite effective in reducing vibration, flux leakage and the
consequent noise and distortion. The audio power supply circuit also
incorporates discrete components, including electrolytic capacitors, carefully
selected for their sound quality.
The two power transformers have round cores with cylindrical cross
sections. This enables far more consistent transformer windings—for
far less radiated hum.
ES DVD Players 2005, Version 4.0
Construction & Design
Page 39
Advertisement
