Section 5 - Connecting to a Wireless Network
It is recommended to enable WPA on your wireless router or access point before configuring your wireless adapter. If you are joining an
existing network, you will need to know the WPA key being used.
1. Open the Windows
®
o n t h e w i r e l e s s c o m p u t e r i c o n i n y o u r s y s t e m t r a y
(lower-right corner of screen). Select View Available Wireless
Networks.
2. Highlight the wireless network (SSID) you would like to connect to
and click Connect.
D-Link DWR-510 User Manual
Configure WPA-PSK
XP Wireless Utility by right-clicking
43