Table of Contents
Advertisement
Available languages
Available languages
EN
ÉPIX™ Strip 2.0 QRG
Power/Signal Connection Procedure
The ÉPIX™ Strip 2.0 uses an RJ45 connection to link all ports. Each strip can be linked
from end-to-end never exceeding a total of 4 strips for each daisy chain. The following
diagram illustrates how to configure the data connections.
Correct
Incorrect
Never connect both data ports on the same end of the strip.
Page 9
ÉPIX™ Strip 2.0 QRG Rev. 2
- Quick Links:
- Installation Procedure
- Data Connections
Hide quick links:
Advertisement
Table of Contents
