Table of Contents
Advertisement
PS/2 Keyboard and Mouse Support [Auto]
Select any of these settings when PS/2 keyboard and mouse are installed. These settings
only apply when fastboot is enabled.
[Auto]
[Full
Initialization]
[Disabled]
Network Stack Driver Support [Disabled]
[Disabled]
[Enabled]
Next Boot after AC Power Loss [Normal Boot]
[Normal Boot]
[Fast Boot]
2.8.2
DirectKey (DRCT) [Enabled]
[Disabled]
[Enabled]
2.8.3
Boot Logo Display [Auto]
[Auto]
[Full Screen]
[Disabled]
The following item appears only when you set the Boot Logo Display to [Auto] and [Full
Screen].
Post Delay Time [3 sec]
This item allows you to select a desired additional POST waiting time to easily enter the BIOS
Setup. You can only execute the POST delay time during normal boot. The values range
from 0 to 10 seconds.
This feature only works when set under normal boot.
2-50
For a faster POST time, PS/2 devices are only available when the system
boots up or rebooted when the PS/2 devices are not reconnected or
changed. If you disconnect or change the PS/2 devices before restarting
the system, PS/2 devices will not be available and BIOS will not be
accessible via PS/2 devices.
For full system control, PS/2 devices are available during POST at any
circumstances. This process extends POST time.
For a fastest POST time, all PS/2 devices are not available until your
computer enters the operating system.
Select to skip the network stack driver from loading during POST.
Select to load the network stack driver during POST.
Returns to normal boot on the next boot after an AC power loss.
Accelerates the boot speed on the next boot after an AC power loss.
Disables the DirectKey button. The system will only power on or off when
you press the DirectKey button.
Allows the system to power on and go to the BIOS Setup directly when you
press the Reset button. Connect the 2-pin connector of the chassis reset
buton cable to the onboard DRCT header.
Sets the boot logo to display during POST.
Sets the boot logo display in full screen during POST.
Disables the boot logo display during POST.
Chapter 2: BIOS information
Hide quick links:
Advertisement
Table of Contents
