Samsung 5500 Series User Manual page 41

You can control your set-top-box or satellite box with the Remote Control. To establish
control, you must first set up theIR extender cable. If you don't have an STB, skip this
section.
Connect theIR extender cable to the TV's IR output connector.
------
I
<t
~ r=l
• (I]
•
•
e cmi i K J
• s
- The displayed image may differ depending on the model.
' IR
Out
1
Connect theIR Extender
1
Cable here.
I
Place the transmitter end
within 4 inches of the set-
top-box's remote control
sensor.
~
Position the transmitter end within 4 inches (1 0 em) of the set-top-box's remote
control sensor, pointing in the direction of the sensor. Make sure there are no
obstacles between the transmitter end of theIR extender cable and the set-
top-box or satellite box. Any obstacles will interfere with the transmission of the
remote control signals.
... Finalize control of your set-top or satellite box when you run Initial Setup.