Removing The Spare Tire - Dodge Dakota 2011 Owner's Manual

Hide thumbs Also See for Dakota 2011:
Table of Contents

Advertisement

Jack Stowage Location (Crew Cab)
WHAT TO DO IN EMERGENCIES 341
WARNING!
The jack is designed as a tool for changing tires only.
The jack should not be used to lift the vehicle for
service purposes, unless suitable supports are placed
under the vehicle as a safety measure. The vehicle
should be jacked on a firm level surface only. Avoid
icy or slippery areas.

Removing The Spare Tire

Remove the spare tire before attempting to jack the truck.
Attach the wheel wrench to the jack extension tube. Insert
the tube through the access hole in the rear bumper and
into the winch mechanism tube. Rotate the wheel wrench
handle counterclockwise until the spare tire is on the
ground with enough cable slack to allow you to pull it
out from under the vehicle. When the spare is clear, tilt
the retainer at the end of the cable and pull it through the
center of the wheel.
6

Advertisement

Table of Contents
loading

This manual is also suitable for:

2011 dakota

Table of Contents