Chrysler 200 Convertible 2014 User Manual page 503

DRIVE and REVERSE while gently pressing the accelera-
tor. Use the least amount of accelerator pedal pressure
that will maintain the rocking motion, without spinning
the wheels or racing the engine.
CAUTION!
Racing the engine or spinning the wheels may lead to
transmission overheating and failure. Allow the en-
gine to idle with the transmission in NEUTRAL for at
least one minute after every five rocking-motion
cycles. This will minimize overheating and reduce
the risk of transmission failure during prolonged
efforts to free a stuck vehicle.
NOTE: Press the ESC Off switch, to place the Electronic
Stability Control (ESC) system in Partial Off mode,
before rocking the vehicle. Refer to "Electronic Brake
WHAT TO DO IN EMERGENCIES 501
Control" in "Starting And Operating" for further infor-
mation. Once the vehicle has been freed, press the ESC
Off switch again to restore ESC On mode.
CAUTION!
• When "rocking" a stuck vehicle by shifting be-
tween DRIVE and REVERSE, do not spin the
wheels faster than 15 mph (24 km/h), or drivetrain
damage may result.
• Revving the engine or spinning the wheels too fast
may lead to transmission overheating and failure.
It can also damage the tires. Do not spin the wheels
above 30 mph (48 km/h) while in gear (no trans-
mission shifting occurring).
6