Power Led - MSI -5149 User Manual

2.3-1 Turbo LED
The Turbo LED is used to monitor if the turbo switch is ON/OFF. You can
connect the Turbo LED from the system case to this pin. (See Figure 2.1)
2.3-2 Hardware Reset
Reset switch is used to reboot the system rather than turning the power ON/
OFF. Avoid rebooting while the HDD LED is lit. You can connect the Reset
switch from the system case to this pin. (See Figure 2.1)
2.3-3 Keylock
Keylock allows you to disable the keyboard for security purposes. You can
connect the keylock to this pin. (See Figure 2.1)

2.3-4 Power LED

The Power LED is always lit while the system power is on. You can connect
the Power LED from the system case to this pin. (See Figure 2.1)
2.3-5 Suspend Switch
The Turbo switch or Suspend switch allows the user to suspend the system
while not in use. It can be controlled by BIOS power management setup
switch function. You can connect the Turbo Switch from the system case to
this pin. (See Figure 2.1)
2.3-6 Speaker
Speaker from the system case is connected to this pin. (See Figure 2.1)
2.3-7 HDD LED
HDD LED shows the activity of a hard disk drive. Avoid turning the power
off while the HDD led is lit. You can connect the HDD LED from the system
case to this pin. (See Figure 2.1).
2-16