Mounting The Chassis In A Four-Post Rack - Dell Networking Z9500 Getting Started Manual

Mounting the Chassis in a Four-Post Rack

Rack Mounting Safety Considerations
WARNING: You must use a lifting device, such as a fork-lift trolley, to lift the chassis.
WARNING: These instructions are a condensed reference. Read the safety instructions in your
Safety, Environmental, and Regulatory information booklet before you begin.
• Rack loading — Overloading or uneven loading of racks may result in shelf or rack failure, which may
damage equipment and cause possible personal injury. Stabilize racks in a permanent location before
loading begins. Mount the components beginning at the bottom of the rack, then work to the top. Do
not exceed your rack load rating.
• Power considerations — Connect only to the power source specified on the unit. When multiple
electrical components are installed in a rack, ensure that the total component power ratings do not
exceed the circuit capabilities. Overloaded power sources and extension cords present fire and shock
hazards.
10
Getting Started Guide